Klip Coder DIAS 2 Wire Decoder

The Aquamonix range of 2-Wire Decoders is marketed globally under Tonick Watering.

Our 2-wire and wireless products can be used in various industries and tailored to specific project needs. All our 2-wire decoder systems and 2-wire irrigation controllers can be applied to a wide range of applications including irrigated agriculture, commercial landscapes, water infrastructure, smart cities and golf and sports turfs.

The Klip Coder DIAS is a Solenoid with true A/C 2-wire decoder. It is suitable for landscape applications and is compatible with Tonick decoder translators.

  • Combines 2-wire decoders and a solenoid into one product
  • Ability to separate and re-attach solenoid from decoder
  • Expandable – simply splice additional decoders into the 2-wire line
  • Economical – typical installation requires up to 80% less cable than conventional systems
  • Redressable – Klip-Coder can be reprogrammed numerous times using the Tonick programming tool
  • Internal lightning protection
  • No grounding required along 2-wire path
  • Versatile – tolerant of earth leakage in the existing cables, retrofit possible, including bunched multiwire to make 2-wire path Suitable for use with the complete Tonick BT2 twin translator family


  • True A/C system not harmful to cable and joints Operating voltage 19VAC-32Vac, 50 Hz or 60 Hz
  • Idle current (typical) – 4.5mA
  • Holding current – 50-60mA
  • In-Rush current – 300-350mA
  • Maximum recommended active solenoids per 2-wire path – 16 (DIAS)


  • Custom firmware for OEM systems
  • Station address limit as per translator
  • Compatible with other Tonick decoders on the same 2-wire path
  • Compatible with the Tonick range of sensor decoders for moisture, pressure, water level, flow and digital inputs


  • Length: 70mm (not including cables)
  • Diameter: 32mm
  • Two sections, both fully potted to waterproof the electronics
  • Connected by high voltage wiring


  • Fluorinated Ethylene Propylene (FEP) high voltage wire, AWG28/0.368mm2, 18KV DC rating, interconnection between decoder and solenoid
  • Type LiYi 0.75, AWG18/0.75mm2, PVC, 550mm length, black, outer for 2-wire path connection

Enquire about this product